Sylenth1 v3. In the world of software synthesizers there are no real classics. But if there are sylenth 3 0 synthesizers that could be called a classic already, I think Sylenth1 from Lennar Digital would be one of them. A short introduction to the synth Sylenth1 is on the market since and is a popular synth amongst EDM producers. For some time now a beta version of Sylenth1 v3 has been available for the public, but recently Lennar Digital released the official v3 sylenth 3 0

Compatibility

sylenth 3 0

There’s more than meets the eye in this powerful softsynth Author: Publish date: Its straightforward design, high-res sound aliasing artifacts are truly inaudible , and thick oscillators make it easy to get started creating your own sounds. So, while its synthesis parameters are familiar and approachable, there are more complex possibilities lurking inside for you to explore.

The straight-forward user interface of Sylenth1 be-lies its deeper programming capabilities. At the top of the screen are buttons that switch between viewing Part A and Part B, each its own two-oscillator-plus-filter affair. This interface lends itself to the layering techniques discussed later in this master class, aided by a Solo button next to the Part switches that allows you to focus on one synth panel at a time.

Because of that depth, you can set up either part to filter all four oscillators, while the remaining part can filter its oscillator pair independently.

Alternately, you can send all four oscillators to both filters simultaneously and modulate them differently. Ultimately, the secret to mastering Sylenth1 lies in understanding how to make the most of these options.

That said, the inclusion of independent phase control for each oscillator and the ability to stack and detune up to eight instances of a given waveform—in stereo—give them their own unique flavor see Figure 1. Invert and Phase. Each oscillator includes a dedicated button for inverting the phase, as well as a knob that allows for continuous adjustment from 0 to degrees.

With no other oscillators sounding, turning this knob results in an erratic timbre shift with some pitch warbling, as there is no phase relationship to other tone sources. Activating the second oscillator with a single voice more on that below , then turning the phase knob results in some lovely timbre shifting effects, making it an excellent candidate for LFO and envelope modulation.

Detune, Stereo, and Voices. These three parameters function interactively to deliver the iconic supersaw sound.

The Voice parameter determines the number of detuned voices in the stack from 0 to 8 , while the Stereo parameter adjusts the width of the stereo field for those voices.

For vintage analog sounds, two voices should be enough for simple two-oscillator effects. For EDM purposes, you can create stacks of up to 32 voices 8 voices per oscillator per note. Leaving it off results in free-running waveforms, which are useful for emulating real analog oscillators. Pro Tip. The filter Drive knob has more tonal subtlety than other softsynths. The dual multimode filters include several routing options and a global Filter Control panel that adjusts both simultaneously.

Interestingly, this is where keyboard tracking is set globally, though you can also use the modulation matrix for discrete values. However, there is a neat trick you can use for re-creating the sound of vintage monosynths. First, create your main patch using only Part A; any kind of classic two-oscillator-with-lowpass sound will do. As you create the patch, set the filter for Part A to include the oscillators for Part B as well.

That said, the LFOs offer a wider range of waveform options than many analog synths, with options for several pulse widths, a triangle-saw, and a Lorenz mode, which delivers natural yet chaotic results that are more organic sounding than either the sample-and-hold or random waves. The modulation matrix displays both LFOs and envelopes simultaneously, along with their routings, with independent depth controls for all elements.

Additionally, the mod matrix includes four Miscellaneous routing tools see Figure 4. You can also use them to assign LFOs and envelopes to additional destinations. To overcome the default maximum modulation depth of a given routing, assign a single source to the same destination multiple times, thus increasing its modulation intensity beyond what the standard settings allow.

The effects section includes useful features such as granular delay smearing, dual chorusing, and a versatile phaser. The seven effects are hardwired in the following order: Having the compressor placed after the reverb enhances the impact of bombast of stacked supersaw chords—yet another reason Sylenth1 is a go-to synth for the EDM crowd.

And if you want to leave your ambient effects airy and spacious, you can always leave the compressor off. High feedback settings work well for big-room whooshes. In addition to the standard chorus parameters, the Dual option re-creates vintage ensemble effects. In ping-pong mode, the spread parameter is useful for narrowing the stereo field for more restrained effects.

While the parameters are bare bones—ratio, threshold, attack and release—this end-of-chain compressor is anything but subtle, which is why its hard character became a trademark of the Sylenth sound. Contrasting, Complimentary, and Composite. Initializing a patch can be accomplished simply by selecting Clear from the Preset menu. Randomizing the values for all synth parameters is another option. Set the polyphony to 6 voices, then select Part A and activate Solo, so you can focus exclusively on its sound.

Set Osc A1 wave to sawtooth with a voice count of 3. Set the detune value to around 3, for a subtle chorusing effect. Set filter input to Oscillators Part A and filter type to Lowpass. The default cutoff of 5 is actually perfect for this type of sawtooth pad sound, so leave it at this value and keep the resonance and drive at zero. The default ADSR envelope shape is a standard gate with sustain at maximum and all other parameters at zero. To give it a more pad-like feel, increase the attack to 2 and release to 5.

At this point it should sound like a traditional saw pad. Now, add the contrasting tone—a sine-based bell. While leaving Solo mode on, select Part B. Set both oscillators to sine waves with a voice count of 1.

Next, give the amp envelope a more bell-like shape, with instant attack, both decay and release values around 7 and zero sustain.

Finally, tailor the individual volumes of Mix A and B and adjust the blend to taste. You can also use this sound as a starting point for vintage Roland LA synthesis tones.

Layering complementary tones is a bit more nuanced, because even small changes to the mix can result in a very different character. Begin by repeating steps 1 through 4 from the Contrasting tutorial, above, but this time increase the cutoff slightly to 6 to give the sawtooth pad a brighter sound. Switch to Part B, leaving it soloed. Set Osc 1B to half-pulse, with a voice count of 3, then increase the detuning to 4 for added thickness. Next, set Osc 2 to noise, with a voice count of 1. Keep its volume very low—around 1—so it is just adding some air to the texture.

Switch the filter to Highpass mode and lower the cutoff to around 3. To align the amp envelopes for both parts, switch back to Part A and use the envelope pull-down to copy its values to the clipboard, then paste them to the amp envelope for Part B.

This results in a hybrid timbre that can be quickly customized using the mixer and global filter tools. Switching between the Parts, set all four oscillators to sawtooth waves, each with two voices slightly detuned 2.

Leave the Amp envelope in its default gate shape with short release. Next, set each oscillator to a different octave for a huge organ-like sound. With an oscillator stack this big, back off on the volumes for all four oscillators to around 6 or 7, then blend to taste in order to highlight different octave ranges. This sound is well-suited to leads and EDM stabs, so add delay and reverb for space and ambience.

You can also use the composite approach to create techno chord stabs by following steps , then for step 4, set each oscillator to a different note in the chord. Check out his soundware company at symplesound.

Master Class: Ableton Operator

Purchase Sylenth1. Sylenth1 Screenshot The full version of Sylenth1 is available for € (ex. VAT) or only € Euro* monthly! Buy now. The full version. In this video Echo Sound Works covers some of the new features in Sylenth1 version Which finally works natively in 64 bit on Mac/OSX.

VIDEO: Sylenth 3 0

Download Link will open Pasted, from there copy your Favoured Link. Google Drive, MediaFire, Mega, Zippyshare. 1. connect with soundcloud. 2. Instagram. Sylenth is a powerful virtual analog VSTi Synthesizer plugin developed and own by LennarDigital. You can use Sylenth1 in your daw to create.

Also Free Download: License_key Txt | Windows 8 1 Master Key